9
CD player
Operation
Use the remote control or from the main unit, press
CD/MP3, to switch the CD micro system on. The
LCD display will light up.
Set the function switch to CD. The display will
initially flash zeros then show ‘no dIsc’.
Only use CDs that bear
the CD logo.
Loading and Unloading CDs
1. Press the EJECT button to open the CD
compartment.
2. Press the EJECT button to close the CD
door. The display will show the total number
of tracks and the total playing time. The CD
door can be opened at any time.
First press either STOP on the remote
control or STOP on the unit, then press the
EJECT button.
Please Note:
- Do not place foreign objects into the CD
compartment, this may damage the
mechanism.
- Always keep the CD door shut, to prevent
dust or dirt from getting into CD mechanism.
- Never place more than one CD into the CD
compartment at any time.
-
After CD door is closed, CD information
may not appear on the LCD display, this
means the CD cannot be read by the CD
mechanism. Refer to the ‘Care and
maintenance’ section.
Playing a CD
On CD micro system, or remote control:
1. Press the play/pause button
. The
display will show the track number and the
elapsed playing time.
2. To pause playback, press the play/ pause
button
. The elapsed time will hold.
3. To resume playback press play/pause
again.
4. To stop playback, press either STOP on
the remote control or STOP on the unit.
Intro
Press INTRO button on the remote control to
intro play the first 10 sec. of each track of the
CD/CD-R/CD-RW disc.
Track Selection
Using the remote control:
1. Press
either
the
buttons to select the
desired track number.
2. Press
play/pause,
to start playing.
Using the unit controls:
1. Press either of the SKIP/TUNING
buttons to select the desired track
number.
2. Press PLAY/PAUSE, to start playing.
Track Selection During Play Using the
remote control:
1. During play, press either of the
buttons
to select the desired track
number. The selected track will
automatically start to play.
Using the unit controls:
1.
During play, press either of the
SKIP/TUNING buttons to select the
desired track number. The selected
track will automatically start to play.
