background image

USER'S MANUAL

Read these instructions included in this IM thoroughly prior to connecting and operating.

Please retain this manual in case you may need it for future reference.

This manual is for reference only and subject to change without notice.

WARNINGS:

Care and Maintenance

—

—

—

—

—

—

—

—

—

—

—

—

—

This TV monitor should be operated only at the adaptor supplied.
Do not try to repair the TV monitor yourself as it contains no user-serviceable parts. The
TV monitor should only be repaired by a qualified technician.
Stop using the TV monitor if the cabinet is damaged. Have it checked by a service
technician.
Put your monitor only in a clean, dry environment. Unplug the monitor immediately if it
gets wet, and consult your service technician.
Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth.
Apply non-ammonia-based cleaner onto the cloth, not directly onto the glass screen.
Keep the TV monitor away from magnetic objects, motors, TV sets, and transformers.
Do not place heavy objects on the cable or power cord.

Avoid exposing your monitor directly to sunlight or other heat sources. Place your TV
monitor away from the sun to reduce glare.
Put your TV monitor in a well-ventilated area. Do not place anything heavy on top of your
monitor.
Make certain that your TV monitor is installed in a clean and moisture-free area.

If smoke, abnormal noise or odor comes out of your TV monitor, switch off the power
immediately and call your service center.
Never try to repair the TV monitor yourself. Always call your service center or a qualified
technician to fix it.
Do not watch during driving, it is dangerous and is illegal!

Safety Tips

Note

This user's manual contains graphics and information that is for reference purposes only
and is subject to change without notice.

1

MODEL: RT701A

IMPORTANT INFORMATION REQUIRED BY THE FCC

NOTE

CAUTION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference; and (2) this device must
accept any interference received, including interference that may cause undesirable
operation.

: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.

: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

—

—

—

—

7-INCH ATSC & NTSC TV RECEIVER

Summary of Contents for RT701A






Reviews: