Operation
Now your CD micro system is installed and ready for use, please refer to the following instructions for
correct operation
AC Power Operation
The CD micro system will be in standby mode, when the AC power supply is connected and switched
on .
At the front of the CD micro system or using the remote control, press POWER to switch the CD micro
system on .The LCD display will light up.
Volume Control
WARNING
Do not turn off the CD micro system when the volume is set at high level. When it is subsequent
turned on, a sudden blast of sound may damage your hearing and the external speakers.
The volume level can be adjusted either using the controls on the unit or by the remote control.
On the unit turn the volume control towards the sign to increase the volume and to wards the
sign to reduce the volume. The volume level will be displayed while adjustments are being made.
To adjust the volume level using the remote control, press the VOLUME / buttons.
Press MUTE on either the unit or the remote control to mute the sound. Press MUTE again to resume
sound.
Note: Pressing any of the volume control buttons will also resume sound.
P.EQ
This system has a 3 -Band Preset Electronic Equaliser that allows you to adjust the tone output for the
most popular types of music. The settings are
CLASSIC
,
ROCK
,
POP
.
To change to EQ setting, press the EQ button on the front panel or on the remote control until the
desired setting appears in the main display.
6
Radio
Operation
At the front of the CD micro system or using the remote
control, press POWER, to switch the CD
micro system on. The LCD display will light up.
Press either the TUNER button on the remote control or the TUNER button on the unit to select the
radio tuner.
Tuning
Press either BAND/STOP on the remote control or BAND/STOP on the unit to select between FM
and AM bands.
Use the tuning buttons on the remote control or on the unit to select the desired station. The frequency
will display on the LCD display.
Pressing any of the tuning buttons briefly will change the frequency by one increment. Pressing and
holding the button for a couple of seconds will cause the tuner to search for the next radio station.
Pressing any of the tuning buttons during a search will stop the search.
Summary of Contents for RCD888
Page 1: ...RCD888 INSTRUCTION MANUAL ...
