background image

L I S T E N I N G   T O  T H E   T A P E

Whilst using the Timer function please ensure the volume is set to a reasonable level before setting the 

timer to avoid Audio shock damaging the speakers at switching on.

Once the timer has activated the unit will remain on for 60minute before switching off and when using 

tape or CD Audio will be heard until the 60 minute switch off time is reached  or the tape or CD ends 

whichever is the sooner. Unless it is cancelled the Timer will repeat every day at the same time .

MUTE

Press the MUTE button on the remote control to switch off the sound The MUTE indicator lights up.

Press MUTE again to restore the sound to the previous level. Mute indicator will go off.

COLOUR/ MODE

Press STANDBY/ON button, seven colour( green  white yellow cyan red purple  blue) will cycle slowly on

the display.  you can fix a colour  that you like  by press COLOUR/MODE button once. If need to change 

another colour ,you need to  press COLOUR/MODE again. The colour cycle anew .

PRESET EQUALIZER

This unit is equipped with a preset equalizer which has been added to enhance your listening 

pleasure by altering the frequency response of the music to give it a different feel Press the 

PRESET EQ button repeatedly to cycle through the following equalization modes.

                      

FLAT(EQ OFF)

CLASSIC

ROCK  

POP

INSERTION AND REMOVAL OF CASSETTES 

Firstly you must press the PUSH OPEN button to open the cassette key door. 

Press the STOP/EJECT  button to open the Cassette Door.

Slip your cassette tape into the door, with the exposed section pointing down and the playback side

facing you.

Close the Cassette Door securely.

When finished, press the Stop/Eject button to open the Cassette Door, and retrieve your cassette tape. 

Summary of Contents for RCD725C

















Reviews: