To Preset Stations using the Unit Controls
1. Press the or buttons to select the desired frequency.
2. Press the PROG/MEM button. MEMORY will flash on the display.
3. Press the M-UP/REPEAT button until the desired preset memory number is displayed.
4. Press the PROG/MEM button to store the frequency into the selected memory location. MEMORY
will stop flashing and remain on the display.
The frequency is now preset.
FM
FM Antenna
Fully extend the FM antenna wire and position it to obtain the best FM reception.
FM Stereo
The CD micro system is capable of receiving stereo FM broadcasts. When you tuned to a stereo
broadcasting,
STEREO
will be displayed.
AM
AM Loop Antenna
For AM reception broadcasts are picked up through a loop antenna that plugs into the back of the unit.
The antenna assembly has a fixing system attached that can be folded to form either a stand or wall
mounting as shown in the figures opposite. The wall mounting has two holes for round head screws.
These are not supplied.
Note: It is normal for the position of the antenna to be adjusted to achieve the best reception. If
selecting the wall mounted option ensure that you can receive the radio stations you listen to before
fixing.
Preset Memory Stations
Your CD micro system can store up to 20 preset radio stations, 10 FM and 10 AM.
Once a station is in a preset memory, it can be retuned by pressing the M-UP/REPEAT button on
either the remote control or the front of the unit until the desired preset number is displayed.
To Preset Stations using the Remote Control
1. Press the or buttons to select the desired frequency.
2. Press the PROGRAM/CLOCK button. MEMORY will on the display.
3. Press the M-UP/REPEAT button until the desired preset memory number is displayed.
4. Press the PROGRAM/CLOCK button to store the frequency into the selected memory location.
MEMORY will stop flashing and remain on the display.
The frequency is now preset.
As supplied
Folded to
form a stand
Folded for
wall
mounting
7
