![background image](http://html1.mh-extra.com/html/curtis/rcd309/rcd309_instruction-manual_2699909009.webp)
8
disc play will resume from that point.
When the last track has finished playing, the CD will stop.
FOR REPEAT DISC PLAY OF ONE OF THE TRCKS
Press the Memory Up/Repeat button once. REPRAT will flash.
Press the Play/Pause button.
The selected track will then begin playing through to its end. At which point it will automatically return to the
beginning of that track. This will continue until the Stop button is pressed.
If the Repeat button is pressed twice, REPEAT will disappear, repeat play will end; normal disc play will resume
from that point.
MENU
Press “Menu” button while P. EQ. off , for the following setup
:
1
.
Press “Menu” once ,”Volume” show on the display, adjust the volume level by pressing “Volume/Up” or
“Volume/Down”.
2
.
Press “Menu” twice , “BBS” show on the display , adjust the bass level by pressing “Volume/Up” or
“Volume/Down”.
3. Press “Menu” three times ,“TS” show on the display ,adjust the treble level by pressing “Volume/Up” or
“Volume/Down”.
ENTERING A PRAGRAM
It is possible to program the tracks you wish to play in a sequence of your choice, it is not possible to enter
programs during disc play. Press the Stop/ Band button first, and then follow the instructions below.
1.
Press the Memory Program Button. The information will be shown on the display.
2.
Select the desired track using Tuning/Search Forward or REW buttons.
3.
Press the Memory Program Button.
(The first program selection is now stored in program memory. The display will now show.)
4.
Select the next desired track using Tuning/Search Forward or REW Buttons.
5.
Press the Memory Down/Program Button.
Continue entering tracks in this way until all the desired tracks are shored (up to 20.)
NOTES:
If the PLAY/PAUSE Button is pressed before the Memory Program Button is pressed to store a track, the track
will not be programmed, and the disc will start playing from the first selected track.
LISTENING TO PROGRAMMED TRACKS
1.
Enter all tracks you want to program into memory following the procedure above.
2.
Press the PLAY/PAUSE Button.
3.
Disc play will start at the beginning of the first Programmed track.
TO CLEAR THE PRAGRAM MEMORY
If the disc is playing, press the STOP Button. The word MEMORY will disappear.
Summary of Contents for RCD309
Page 1: ...INSTRUCTION MANUAL RCD909...