Curtis 1207B Manual
27
2 9 J U N E 2 0 1 2
D R A F T
Monitor Menu
(not all items available on all controllers)
Throttle
Throttle reading, as percent of full throttle
Batt Voltage
Battery voltage
Heatsink Temp
Heatsink temperature
Max Temp
Maximum temperature seen
*
Min Temp
Minimum temperature seen
*
Brake Input
Brake switch: on/off
Speed Input
Mode switch: on (Mode 1) / off (Mode 2)
EMR Rev Input
Emergency reverse switch: on/off
For ward Input
Forward switch: on/off
Reverse Input
Reverse switch: on/off
Fwd Cont
Forward contactor: on/off
Rev Cont
Reverse contactor: on/off
*
Maximum/minimum temperatures recorded
since the Fault History was last cleared.
Fault List
This is not a menu as such, but simply a list of the possible messages you may
see displayed in the “Fault » System Faults” menu or the “Fault » Fault History”
menu. The messages are listed here in alphabetical order.
BB Wiring Check
BB wiring check failed
Contactor Driver Fault
Incorrect main driver feedback signal
(when shunt function is disabled)
CONT DRVR OC
Contactor driver overcurrent
Currently no faults
No known faults
DIR CONT Welded
Direction contactor welded
HPD
High-pedal-disable (HPD) activated
HW Failsafe
Hardware failsafe activated
Low Batter y Voltage
Low battery voltage (<16V)
M- Shor ted
M- output fault
Missing Contactor
Missing contactor
Over Voltage
Overvoltage (>33V)
SRO
Static-return-to-off (SRO) activated
Thermal Cutback
Cutback, due to over/under temp
Throttle Fault 1
Throttle input fault
Throttle Fault 2
Throttle Type changed without cycling KSI
6 — HANDHELD PROGRAMMER
