10
PRESENT TUNING
1. Select the AM/FM band and tune to your desired station according to the normal tuning
procedure.
2. Press the MEM/C-ADJ BUTTON,” P-01” will appear and flash in the LCD, Then use M+ or M-
BUTTON to change the number where the station will be stored. (NO.1 to NO.10)
3. Store the current frequency by pressing MEM/C-ADJ Button again when you get the desired
number.
4.
Repeat the same procedure to set other desired frequencies into Memory No.1 to NO.10.
Remarks: A stored frequency can only be erased by storing another frequency in its place.
MEMORY RECALL
Recall the stored frequencies by pressing M+ or M- BUTTON select 1 to 10 stations as desired
NOTE: As stored frequencies can only be stored for long time with the power supplying. The station
you stored will be lost and can not be recalled in case that you cut off the AC power.
iPod Installation and Use
Installing the iPod into the Unit:
1. Rotate the Docking Knob corresponds to the model of iPod to be used, and place the iPod into
Dock.
2. Ensure that the iPod is firmly in place..
NOTE: For older iPods that do not have a Dock Connector, use a stereo audio cable (not
included) to connect the device to the Auxiliary Input Jack on the back of the unit (see the
"Using a Non-Docking iPod or Other Audio Device" subsection)
3. Press the FUNCTION/AL. SEL Button to “iPod” mode.
4. Press the PLAY/BAND Button to the Play the iPod.
5. Press VOL-/VOL+ Button to your preferred Listening Level.
6. Press SKIP-/TUNE- to listen to the previous tracks.
7. Press SKIP+/TUNE+ Button to the next tracks..
8. To stop the iPod play temporarily, press Play/Band button, to resume, press again.
9. To turn off the unit, press Power/AL. Off Button.
Charging the iPod in the Unit:
The unit will recharge the iPod while docked. Ensure the iPod is properly inserted.
NOTE
:
The unit wills not charge an iPod Shuffle or any other audio device.
REPEAT FUNCTIONS
-
The REPEAT BUTTON can be used to repeat a single track and repeat all the tracks.
-
To repeat a single track. Press the REPEAT BUTTON once. REPEAT SIGNAL will show on the
iPod Display.
-
To repeat all of the tracks on a CD. Press the REPEAT BUTTON a second time. REPEAT ALL
will show on the LCD Display.
-
To exit the REPEAT mode. Press the REPEAT BUTTON a third time.
