Programming Options
The grinder has been adjusted at the factory to provide satisfactory performance in most situations. In the
event that you would like to vary the grinder settings, it can be reprogrammed. Both sides of the grinder are
programmed identically.
1
1MBDFBQBQFSmMUFSCFOFBUIUIFHSJOEFSTQPVUUPDBUDIDPGGFF
as it is ground.
2 Turn off the unit at the front panel ON/OFF button.
3 Press and hold one of the grind buttons (LARGE, MEDIUM or
SMALL).
4 Press and release the ON/OFF button while continuing to hold
the grind button.
5 In the red window, the programmed grind time for the button
pressed will appear, in seconds. Continue to hold the grind
button and the time digits will start at 00 and increase.
Release the button to set the new time. The TIMER SETTINGS
table below can be used as a guide to estimate the amount of
ground coffee you dispense with the chosen setting.
6 Wait for the motor to completely stop (10 seconds).
7 To set and exit, press and release any other grind button.
8 Repeat the above steps to reprogram one of the other grind
buttons (LARGE, MEDIUM or SMALL).
PROGRAMMING GUIDE
PG15
*-(%130(3"..*/((6*%&ø
/$
Seconds
Ounces
(Estimated)
Seconds
Ounces
(Estimated)
4
1.3
15
4.5
5
1.5
20
6.2
6
1.8
25
7.6
7
2.0
30
8.8
8
2.5
35
10.0
10
3.0
40
11.8
12
3.7
45
13.5
TIMER SETTINGS
IMPORTANT:
Use the above time settings as a general guide. Actual amounts will vary with the grinding
burr setting (see
Grinder Adjustment Procedure
in the
TROUBLESHOOTING GUIDE
BOE UIF TQFDJmD
coffee variety used. After changing the timer, weigh the output, then make adjustments if necessary.
