Guarantee:
Curtis Instruments’ products and/or components
are guaranteed against defects in workmanship and material
for a period of two years, or as defined in the individual product
literature, from date of shipment from our factory, when applied
in a proper application within specified ratings. This guarantee
is limited to repair or replacement F.O.B. our factory. There is no
further warranty or implied representation, guarantee, promise or
agreement as to any Curtis Instruments product and/or com-
ponent. Curtis Instruments, Inc., cannot assume responsibility
or accept invoices for unauthorized repairs to its products and/
or components, even though defective. In no case will Curtis
Instruments’ responsibility extend to products, components
or equipment not of its manufacture. Under no circumstances
shall Curtis Instruments, Inc., be liable for any special or conse-
quential damages or loss of profits or other damages. Returned
goods will not be accepted unless identified by a Curtis Return
Material Authorization (RMA).
All specifications are subject to change without notice.
CURTIS INSTRUMENTS, INC.
200 KISCO AVENUE
MT. KISCO, NY 10549 USA
TEL (914) 666-2971
FAX (914) 666-2188
5. Maintenance
The 3100T is not serviceable in the field.
6. Safety
• This instrument was manufactured and tested according to the
applicable technical standards. It complies with all the safety
regulations as shipped from the factory.
• Installation and startup must be performed by skilled personnel.
• Failure to install and operate the unit in accordance with these
instructions may result in damage or injury.
• If safe operation of the instrument can no longer be ensured,
stop and secure it against accidental operation.
• If instrument failure or malfunction may cause personal injury or
material damage, use additional safety measures such as limit
switches, guards, etc.
• Read the Operating Instructions carefully before startup.
•
Note the safety instructions marked with this warning
symbol in this manual.
Specifications subject to change without notice
53072 REV A 11/08
©2008 Curtis Instruments, Inc.
is a trademark of Curtis Instruments, Inc.
