REMOTE CONTROL PREPARATION
Battery Installation
Service life of batteries
Notes:
Notes:
Insert the batteries while observing the positive (+)
and Negative (-) polarities as Figure A.
The batteries normally last for a year although this
depends on the operation and on how often the remote
control is used.
If the remote control unit fails to work even when it is
operated near the player, replace the batteries with
new ones. Use size AAA UM-4 batteries (2 pieces).
Do not use rechargeable (Ni-Cd) batteries.
Do not attempts to recharge, short circuit,
disassemble, heat or throw the batteries into
Do not drop, step on the remote control,
it may damage the parts or lead to
Do not mix old and new batteries. If the remote
control is not going
the
Wipe away any electrolyte
control, and install
If the leaking electrolyte has
of your body, wash
Remote control
The operation range of the
than 5m from and
front of the unit
The operating distance may vary
brightness of the room.
Do not point bright lights to the remote control sensor.
Do not place objects between the remote control and
the remote control sensor.
Do not use this remote control together with the
remote control of any other equipment.
fire.
otherwise
malfunctioning.
to be used for a long time remove
batteries. Otherwise, electrolyte may leak and
lead to malfunctioning or even burns by electrolyte.
leaking inside the remote
new batteries.
contact with some parts
it off thoroughly with water.
operation range .
remote control is no more
within about 60 degree wide in
(Figure B).
according to the
DVD PLAYER
Remoto control sensor
Among 5 meters
30
¡£
30
¡£
10
DVD 1047
