5
1.Turn On the TV and Your DVD Player
Press the Power or Standby button on the player or the remote controller, and Read appears
on the TV screen. If there is not a disc in the DVD player, No disc will be displayed on both
the screen and the VFD.
2.Insert a Disc
Press the Open / Close button on the remote controller or the front of the DVD player, and
Open appears on the screen. Then place a disc gently into the tray with the disc's label
facing up (double-sided discs have content on both sides, so you can place either side up),
and press the Open / Close button again to close the disc tray, Close appears and the player
starts to read. Then the disc starts playing automatically.
(Note: Of certain type discs,
after reading out the type, the Play or Enter button should be pressed to start playing.)
3. Play
The contents of each disc menu vary according to how the disc was authored and what
features are included. The disc menu will be turned on for you to select, when Menu button
pressed. Also play and pause can be switched with the Pause button on the remote.
a) Menu Play (compatible with DVD, SVCD, VCD2.0 discs)
I. Press Menu ,PBC button
TV screen displays the DVD Root Menu when a DVD disc is loaded.
When a SVCD or VCD 2.0 disc is loaded, SVCD or VCD 2.0 menu will be displayed on the
screen.
When PBC is off, At this moment, press PBC button once to display current PBC state.
PBC is initialized on when a SVCD or VCD2.0 disc is loaded.
MENU
is initialized on when a DVD disc is loaded.
II. When a DVD disc is loaded, you can press Arrow buttons to highlight the menu item you
want to choose; As SVCD or VCD2.0, you can press Numeric buttons to select a track to
play.
III. Press Enter button, you can begin play with the highlighted.
IV. Return when playing: When a DVD disc is playing, press Menu button, and you can
return to Root Menu; As SVCD, VCD2.0, and PBC is on, press Tittle/Return button,
you can return to the menu.
V. Stop
1) When you press Stop button for the first time, the player turns into quasi stop state. At
the same time the OSD appears Quasi Stop . To begin the title over, press Stop button twice.
2) In quasi stop state, the player remembers where you stopped, when you start playing the
disc again, the DVD player picked up where you left off.
3) In stop state, when you press Play button, the player enters sequence playback mode.
For the disc protection, before you press Open / Close button to eject the disc tray when
playing, please press Stop button first. After taking out the disc, press Open / Close
again to close the tray.
If you're not going to use the DVD player for a long time, be sure unplug.
b
) Title Play (compatible with DVD discs only)
I. During DVD playback, press Title/Return button to display the DVD title content.
II. Press the Arrow buttons to highlight the title you want to choose, and press Enter button; Also
you can press Numeric buttons to choose.
III. The DVD player begins with chapter 1 of the chosen title.
.
Chapter 1 Basic Operation
