Curtis DVBTUK-T3, User Manual

Page: 13 / 32

8
8) Channel Change OSD Banner
Channel Change Banner
This service is encrypted
No services are stored in the receiver
This is a data/MHEG only service
This is a audio only service No Signal
9) Audio
Pressing the audio key will display the following menu. This menu
displays all the audio streams available on the current service. The
selection is done using the up/down keys. Pressing the OK key
selects the new audio. This selection is only valid until power-down
or service change. This menu will be automatically removed after 5
seconds.
Audio menu
This is the graphic seen after using CH+/CH- or when a direct digit
entry channel change is completed. It times out after 4 seconds If
CH+/CH- is used then the new service will be the next/previous
service in the currently selected favourites list. If no favourites list is
selected/ enabled then the full service list will be used. Direct digit
entry will tune to a service using its LCN. This may not be in a
favourite list. This OSD will be semi-transparent and will
automatically timeout after 3 seconds.
This banner will stay permanently on the screen when no video can
be watched on the TV. This banner will also display the current
favourite list enabled and if the service is new or removed. The
following messages will be displayed under various circumstances:
:90X128mm