Curtis CR4947 Owner'S Manual Download Page 7

7

Operations

TO SET THE ALARM TO WAKE TO BUZZER

1.  Set the alarm time as previously instructed. Slide the MUSIC/BUZZER 

  switch to BUZZER position.

2.  After switch to the BUZZER position and make sure the power is off. When

  the actual time matches the selected preset alarm time(s), the unit 

  automatically turns on.

TO SHUT THE ALARM OFF

1.  To shut the alarm off, press the POWER button once and the alarm time will 

  be reset for the next day.

2.  Press ALARM SET button (AL1 or AL2) to turn off the alarm and not set it 

  for the next day.

SNOOZE

1.  The alarm can be temporarily turned off manually by pressing the SNOOZE 

  button. 

2.  The alarm will turn back on automatically 6 minutes later. It can be repeated 

  endlessly.

TO ACTIVATE THE SLEEP FUNCTION

1.  Press the SLEEP button and "90" will appear on the clock display.

2.  "90" will appear and set the unit to turn off after 90 minutes. Press again and 

  it will deduct 10 minutes and so on.

3.  Release the SLEEP button the Sleep function will activate and the SLEEP 

  indicator will light solid. 

4.  Pressing the SLEEP button until normal clock or CD track display appear to 

  turns off the Sleep feature.

 

Summary of Contents for CR4947














Reviews: