2
③
Volume up and volume down buttons
④
Microphone
⑤
Earphone
⑥
Charger socket
Before you can start using the headset, you must charge the battery and pair the headset with a compatible
phone.
Note: Parts of the headset are magnetic, Metallic materials may be attracted to the headset .Do not place
credit cards or other magnetic storage media near the headset, because information stored on them may be
erased.
■
Charger and batteries
Check the model number of any charger before using it with this device. The Bluetooth headset is intended
for use with the USB charging cable that is included in the package (AC adaptor is not included). If you use
AC adapter, please make sure it’s output is DC5V & 200mA with correct local power supply voltage.
Charge the battery
This device has an internal, rechargeable battery. It connects the charging cable to the headset.
1. Connect the USB charging cable to a PC. The red indicator light is displayed during charging. If charging
does not start, disconnect the charging cable, pug it again, and retry. Charging the battery fully may take
up to 2 hours.
2. When the battery is fully charged, the red indicator light will turn blue. Disconnect the charging cable
from the PC and the headset.
The fully charged battery has power for up to 4 hours of talk-time or up to 200 hours of standby time.
However, the talk and standby times may vary when used with different mobile phones, products that use a
Bluetooth connection, usage settings, usage styles, and environments.
When the battery is running out of power, the red indicator light starts to flash.
■
Switch the headset on or off
To switch on, press and hold the Answer/end key for 3 seconds. The blue indicator light starts to flash.
To switch off, press and hold the power key for 4 seconds until headset beeps 2 times and the red indicator
light is displayed briefly.
■
Pair the headset with a compatible phone
1. make sure your headset is turn off
2. push the answer/end key for 8 second until the blue and red light flashes alternately
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the
user guide of your phone for instructions.
4. Select the headset (BT 1056) from the list of found devices.
5. Enter the pass code 0000 to pair and connect the headset to your phone. In some phones you may need
to make the connection separately after pairing. See the user guide of your phone for details. You only
need to pair the headset with your phone once.
6. If the pairing is successful, the headset’s blue light will flash 3 times briefly for the first time follow by a
single flash every 7 seconds. The headset’s name appears in the phone menu where you can view the
currently paired Bluetooth devices.
