INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Remove (1) bolt for the heat shield using a 13mm socket and
(1) speed nut to remove the heat shield. Cut a notch in the
heat shield to clear the forwardmost mounting hole on the
driver side frame rail using aviation shears. Reinstall the heat
shield using the bolt and speed nut.
5. Reverse fishwire 1/2" carriage bolts and SP10 spacers
through the access hole. Carefully pull bumper cover and
raise hitch into position. Loosely fasten the hitch using 1/2"
flange nuts on both sides.
4. Enlarge the attachment holes along the bottom of each
frame rail and the hole on the outside of each frame rail.
Fishwire 1/2" carriage bolts and SP10 spacers through
the access hole to the forwardmost hole and outside holes
on each frame rail.
6. Torque all 1/2" hardware to 110 ft-lbs.
5 in.
2.125 in.
Summary of Contents for 12148
Page 5: ......
