ATV Cargo Carrier
Operation Manual & Safety Instruction
Model: 18101
Installation A
1.
Unpack all parts and identify according to FIG.1&2 and PARTS LIST 1&2.
2.
Position the rear flat rack (part no. 18100) so it is centered on the rear rack of the ATV.
a.
The rack extension of the ATV may have to be removed before the basket can be installed.
3.
Position any two sets of mount plates under the ATV rack so the mounting plates holes line
up with the holes of the rear flat rack. Insert M8*50 bolts (part no. DB-11) through washers
(part no. DB-10), rear flat rack, and into the mount plates. Leave the bolts loose until all the
bolts have been installed.
a.
If the mount plates don't work, refer to the
Assembly/Mounting Installation B
on the back of
this sheet.
4.
Align the rear flat rack evenly on the ATV rack and tighten all bolts.
5.
Insert the plugs (part no. DB-6) into square tubes
PARTS LIST
ITEM Q'TY PART
NO.
DESCRIPTION
ITEM
Q'TY
PART
NO.
DESCRIPTION
1
1
RF-1
REAR FLAT RACK
5
2
DB-8
MOUNT PLATE,5.4"
2
1
N/A
ATV RACK
6
12
DB-11
BOLT M8*50
3
2
DB-9
MOUNT PLATE,3"
7
12
DB-10
FLAT WASHER,M8
4
2
DB-7
MOUNT PLATE,11.75"
8
2
DB-6
SQUARE TUBE PLUG
