Curt Manufacturing 13118 Installation Manual Download Page 4

Page: 4 / 4

CURTMFG.COM

•

PRODUCT SUPPORT: 877.287.8634

•

13118-INS-RA

•

05/13/2020

•

ECN7022

•

PAGE 4

TOWING BASICS & SAFETY INFORMATION

For information on safely towing your trailer, visit

curtmfg.com/understanding-towing

Final Installed Image

Step 5

Torque all 5/8" fasteners to 210 lb-ft.

Raise the spare tire back into position.

Step 4

Raise the trailer hitch into position and pull

the fishwires so the carriage bolts are in

their final position. Remove the fishwires

carefully and loosely install the supplied

5/8" serrated flange nuts (#4).

If removed in Step 1, reinstall the grounding

cable with the provided M8 flange bolt (#6).

Summary of Contents for 13118

Page 1: ...videos guides and much more Before you begin installation read all instructions thoroughly Proper tools will improve the quality of installation and reduce the time required This installation requires...

Page 2: ...e through spacer and thread bolt into coil Kink wire to keep spacer seperate from bolt as shown Pull fishwire spacer and bolt through frame and out mounting hole Use fishwire to guide hitch during mou...

Page 3: ...l through hitch mounting hole in vehicle frame rail and out the access hole Pass coiled end of fishwire through spacer and thread bolt into coil Kink wire to keep spacer seperate from bolt as shown Pu...

Page 4: ...nal Installed Image Step 5 Torque all 5 8 fasteners to 210 lb ft Raise the spare tire back into position Step 4 Raise the trailer hitch into position and pull the fishwires so the carriage bolts are i...