INSTALLATION WALKTHROUGH:
3. Enlarge access holes to allow 7/16"-14 carriage bolts and
SP7 spacers to pass through. Fishwire 7/16"-14 carriage
bolts and SP7 spacers through the enlarged access holes
and out the holes drilled in Step (2).
4. Raise hitch into position and loosely secure the rear most
holes with 7/16"-14 flange nuts. Sandwich the hitch side
plates between the frame rails and the exhaust brackets,
secure with M8-1.25 hex bolts and 3/8" conical toothed
washers.
5. Torque all M8 hardware to 23 ft-lbs. Torque all 7/16"
hardware to 70 ft-lbs.
CAUTION
: BALLMOUNT MAY BECOME HOT DUE TO
CENTER EXHAUST! ELECTRICAL WIRING MUST BE
A MINIMUM OF 12" FROM THE EXHAUST TIPS!
Summary of Contents for 11431
Page 4: ......
