ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
S225045-2-INS-RB
•
PAGE 2
Step 1
Beginning on the driver side, locate
the three mounting tabs along the
bottom edge of the vehicle.
Step 4
Repeat steps 1 through 3 for the front, middle
and rear mounting locations on the passenger side.
Step 2
Starting at the front mounting location,
remove any debris from the factory studs.
Attach a mounting bracket using
an M8 nylock nut and flat washer.
Repeat this process for the
middle and rear mounting locations.
Snug the hardware, but do
not fully tighten at this time.
Step 3
Position the driver-side side bar onto the
mounting brackets. Attach the side bar to
the mounting brackets using M10 hex bolts,
flat washers and lock washers.