Currys Essentials CWC16B10, Instruction Manual

Page: 7 / 16

GB-7
Bef
or
e
U
se
Oper
ation
Specifica
tion
Cleaning
and
M
ain
tenanc
e
Saf
et
y
W
ar
nings
Operating Instructions
Switching On Your Wine Cooler
1. The internal temperature of your wine cooler
is controlled by a thermostat. There are 7
settings, of which position 7 is the coldest and
position 0 turns the wine cooler off.
2. Make sure that the Thermostat Control Dial,
located inside the wine cooler on the right
hand side is set to 7.
3. After the wine cooler has been on for 20
minutes adjust the Thermostat Control Dial
to 5 – 6.
4. This is the recommended setting for the
wine cooler when operating at normal room
temperature (between 16°C and 32°C).
5. The wine cooler may not operate at the
correct temperature if it is in a particularly hot
or a particularly cold room, or if you open the
wine cooler door often.
6. If you are concerned that your wine cooler is
not being kept cold enough and wish to check
the temperature you will need a special wine
cooler thermometer. These are available from
most supermarkets and hardware shops.
7. Place the thermometer on the middle shelf of
the wine cooler, where it can be read easily.
Leave overnight, the temperature in the
wine cooler should be between 5°C and 20°C
depending on the type of wine.
8. In the 0 position the wine cooler will not
operate, but the power supply remains
connected.
Stacking the Wine Bottles
The shelf system has been designed
so that a range of shelf heights can be
selected. All the shelves can be adjusted.
There is also a bottle rack at the bottom
of the wine cooler.
Max Capacity :
16 bottles