Cleaning Before Use
Wipe the inside of the unit with a weak solution of warm water and bicarbonate soda. Then
rinse with warm water using a sponge or cloth. Wash the shelf and bottle rack with a mild
detergent solution. Wipe completely dry before replacing the shelf and bottle rack. Clean the
exterior of the unit with a damp cloth, using mild detergent and warm water.
If you require more information refer to the Cleaning section.
Before Using Your Unit
Before placing any wine in the unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overfilled.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time
to settle.
INSTALLATION
11
CWC15B14_IB_Final140122.indd 11
22/01/2014 9:19 PM
Summary of Contents for CWC15B14
Page 1: ... Wines not included INSTRUCTION MANUAL 15 BOTTLE WINE COOLER CWC15B14 ...
Page 2: ......
Page 19: ......