GB-6
Bef
or
e
U
se
Oper
ation
Cleaning
and
M
ain
tenanc
e
Specifica
tion
Saf
et
y
W
ar
nings
Installation
Location
When selecting a position for your freezer you should make sure the floor is flat and firm, and the room is
well ventilated with an average room temperature of between 16°C and 32°C. Avoid locating your freezer
near a heat source, eg. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical
consumption. Extreme cold ambient temperatures may also cause the appliance not to perform properly.
This freezer is not designed for use in a garage or outdoor installation.
Do not drape the freezer with any covering. When installing, ensure that free space is left at the sides. You
may refer to the Overall Space Required in the Specification section. The freezer door can open to the right
or the left, depending on what better suits the location.
•
If you want to have the door swing reversed, we recommend that you contact a qualified
technician. You should only try to reverse the door yourself if you believe that you are
qualified to do so.
•
All parts removed must be saved to do the reinstallation of the door. You should rest
the freezer on something solid so that it will not slip during the door change process.
Do not lay the freezer flat as this may damage the coolant system. Ensure the freezer is
unplugged and empty. We recommend that 2 people handle the freezer during assembly.
Installing the Freezer
Please refer the the Installation Guide.
Levelling the Freezer
To do this use the two levelling feet at the front of the
freezer.
If the freezer is not level, the door and magnetic seal
alignments will not be covered properly.
Cleaning Before Use
Wipe the inside of the freezer with a weak solution of bicarbonate soda. Then rinse with warm water using
a ‘wrung-out’ sponge or cloth. Wash the baskets in warm soapy water and dry completely before replacing
in the freezer. Clean the exterior of the freezer with a damp cloth.
If you require more information refer to the CLEANING section.
•
Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
freezer.
•
Before Turning On!
Do not turn on until two hours after moving the freezer. The coolant fluid needs time to
settle.
Before Using Your Freezer
Before placing any food in your freezer, turn it on and wait for 24 hours, to make sure it is working properly
and to allow the freezer to fall to the correct temperature. Your freezer should not be overfilled.
