manualshive.com logo in svg

Currys Essentials CID60W12, Instruction Manual, Page: 17 / 36

Share
Download
Currys Essentials CID60W12 Instruction Manual Download Page 17

17

Adding Rinse Aid

Rinse aid helps to ensure water does not cling and leave marks on crockery during the drying phase and 
helps crockery dry faster after it has been washed. Only pour rinse aid that is for domestic dishwashers into 
the reservoir. This model is designed to use liquid rinse aids only.
Please follow the steps below to pour the rinse aid into the storage reservoir. The amount will dispense 
automatically.
1.  Turn the cap and open as indicated.

2.  When the cap open marking is aligned, you 

may lift the cap up.

3.  Pour the rinse aid in until the level indicator 

turns completely black in colour. Close the 
cap.

4.  Be careful not to overfill the reservoir. Wipe 

up any spills. The approximate volume of the 
rinse aid reservoir is 110ml.

open

rinse aid indicator

If the water hardness in your area is soft, you may 
not need rinse aid as it may cause white film to 
develop on your dishes.

•  Rinse aid warning light will illuminate when the reservoir is 

running out of rinse aid and requires refilling.

•  Alternatively, you can judge the amount of rinse aid by checking 

the rinse aid indicator right next to the reservoir’s cap. When the 
indicator is black, it means it is full. When it is clear, it means it is 
almost empty.

* All images are for reference only; please refer to your individual unit for actual item.

Summary of Contents for CID60W12





































Reviews:

No comments