
GB-33
•
Other means for disconnection from the supply must be incorporated in the fixed wiring with at least
3mm contact separation in all poles.
•
The door should not be left in the open position since this could present a tripping hazard.
•
For energy saving, always remember to switch the dishwasher off when you have finished using it. The
dishwasher should not be left unattended when in use.
•
Remove the door to the washing compartment when removing an old dishwasher from service or
discarding it.
•
During installation, the power supply cord must not be excessively or dangerously bent or flattened.
•
Do not tamper with controls.
•
The appliance is to be connected to the water mains using new hose sets.
•
The maximum number of place settings to be washed is 8.
•
The maximum permissible inlet water pressure is 1Mpa, and the minimum permissible inlet water
pressure is 0.04Mpa.
Earthing Instructions
WARNING: THIS APPLIANCE MUST BE EARTHED.
•
This appliance is equipped with a mains cable having an equipment-earthing conductor
and an earthing plug.
•
The plug must be plugged into an appropriate outlet that is installed and earthed in
accordance with local standards and requirements.
•
Improper connection of the equipment-earthing conductor could result in a risk of electric
shock.
•
The wires in the cord are coloured as follows:
•
Green and Yellow = Earth,
•
Blue = Neutral,
•
Brown = Live.
•
Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed or the plug does not fit correctly.
•
Never modify the plug provided with the appliance.
CID45B10_IB_110426.indd 33
4/26/11 8:15 PM