Safety.Warnings
Read all the instructions carefully before
using the unit and keep them for future
reference.
Retain the manual. If you pass the unit
onto a third party make sure to include
this manual.
Check that the voltage marked on the
rating label matches your mains voltage.
Damage
Please inspect the unit for damage after
unpacking.
Do not continue to operate the unit if
you are in any doubt about it working
normally, or if it is damaged in any way -
switch off, withdraw the mains plug and
consult your dealer.
Location.of.Unit
The unit must be placed on a flat stable
surface and should not be subjected to
vibrations.
Do not place the unit on sloped or
unstable surfaces as the unit may fall off
or tip over.
The mains socket must be located near
the unit and should be easily accessible.
This unit is designed for indoor use only.
Temperature
Avoid extreme degrees of temperature,
either hot or cold. Place the unit well
away from heat sources such as radiators
or gas/electric fires.
Avoid exposure to direct sunlight and
other sources of heat.
Naked.Flames
Never place any type of candle or naked
flame on the top of or near the unit.
Moisture
To reduce the risk of fire, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing.
No objects filled with liquids, such as
vases, should be placed on the unit.
If you spill any liquid into the unit, it can
cause serious damage. Switch it off at the
mains immediately. Withdraw the mains
plug and consult your dealer.
Ventilation
To prevent the risk of electric shock or
fire hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
Do not install or place this unit in a
bookcase, built-in cabinet or in another
confined space. Ensure the unit is well
ventilated.
Safety
Always disconnect the unit from the
mains supply before connecting/
disconnecting other devices or moving
the unit.
Unplug the unit from the mains socket
during a lightning storm.
Mains.Cable
Make sure the unit or unit stand is not
resting on top of the mains cable, as
the weight of the unit may damage the
mains cable and create a safety hazard.
If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualified persons in
order to avoid a hazard.
37
C1STB11_IB_110608_Annie.indd 37
11年6月8日 下午3:23
