Currier Tech 350 Series Instruction Manual Download Page 19

Important Note:

Keep a copy of your purchase receipt on hand and available in case

you should need service under the warranty. We recommend you attach a copy of
your receipt to this manual and store both in a safe and easy-to-remember place!

V. Limited Warranty

Currie Technologies Inc. (CTI) manufactured or distributed “Electro-Drive” powered products are warranted to
the original retail purchaser to be free from defects in materials and workmanship in the frame and components,
except for batteries, tires and inner tubes for a period of 180 days from the date of purchase. Batteries are
warranted to the original purchaser to be free from defects in materials and workmanship for a period of
ninety (90) days from the date of purchase, and are prorated at a declining 33-1/3% per month, or fraction
thereof, for the subsequent three months. Tires and tubes are warranted to be free from manufacturing
and material defects for 30 days(*). This warranty does not include damage from normal road hazards, flat
tires, tire cuts and the like, skid wear or blowouts from over inflation or other such misuse, or normal wear.
Warranties are limited to repair and/or replacement of scooters and/or parts judged by CTI at its sole
discretion to be defective.

CTI Limited Warranties do not cover or apply to the following: Normal wear and tear; any damage, failure
and/or loss caused by accident, shipping, misuse, neglect, abuse and/or failure to follow instructions or
warnings as stated in the applicable owner’s manual or other printed materials provided with the product;
damage, failure and/or loss caused by the use of the product for stunt riding, ramp jumping, competition,
off-road use, acrobatics, trick riding or other similar activities, or use in any other manner for which such
products were not specifically designed. This warranty does not apply to any products or components,
mechanical and/or electrical, which have in any way been altered from their original configuration by any
person. CTI will not be liable and/or responsible for any damage, failure or loss caused by any unautho-
rized service or use of unauthorized parts.

The CTI Limited Warranty does not cover or apply to any Currie product used for rental or commercial purposes
unless the specific product is designated, labeled or marketed by CTI as acceptable for rental or commercial use.

All warranty claims must be made directly to the selling retailer. The selling retailer is the primary provider
of warranty support and customer service. CTI may choose to perform warranty service at the sole choice
of CTI. The original owner of the product must provide proof of purchase prior to approval of any warranty
claim. Under no circumstances does this limited warranty include any costs associated with shipment
and/or transportation to or from the retailer or CTI. CTI, at its sole discretion, has the option of replacing
with a new part, or factory re-certified part, or repairing any defective product and/or component thereof,
or to pay the owner of such a product an amount equal to the original purchase price of such product. The
original owner shall pay for all costs of labor associated with any warranty claims. 

This warranty supercedes all previous warranties. The warranties stated herein are in lieu of and expressly
exclude all other warranties not expressly set forth herein, whether expressed or implied by law or otherwise,
including, but not limited to, any warranties for merchantability and/or fitness for any particular purpose.

CTI shall in no event be liable or responsible for incidental or consequential losses, damages or expenses
in connection with their scooter products. The liability of CTI hereunder is expressly limited to the replacement

PAGE 19

Summary of Contents for 350 Series





















Reviews: