REMOTE CONTROL
Quick USER GUIDE
The optional remote control provides the user with added functionality for
controlling their blinds. The remote control contains single push ability to
move the slats open, closed, or to your favorite position. The remote also
allows the user to set up separate channels to control specified blinds for
customized control.
Tilt Up/ Left
Tilt Down/ Right
Channel Selector
Favorite
Full Up/ Left
Full Open
Full Down/ Right
Channel LEDs
1
4
3
2
5
CH
1
4
3
2
5
CH
1
4
3
2
5
1
4
3
2
5
REMOTE BUTTON DESCRIPTIONS
TILT TOGGLE
Briefly press and release to move the slats in the open or closed direction
and stop at the next position setting. There are seven (7) position settings
from the full up to the full down position. The user may also press and hold
the toggle button until the slats get to the desired position, then release the
toggle.
FULL UP/ LEFT
Moves the slats to the full up position for horizontal blinds or full right
position for vertical blinds.
FULL OPEN
Moves all slats to the full open position.
FULL DOWN/ RIGHT
Moves all slats to the full down position for horizontal blinds, or full left
position for vertical blinds.
FAVORITE
The user can program this button to any position they choose to be their
most preferred position; however, if left unchanged it will move the slats to
approximately half way between the full open and the full down/ left position.
CHANNEL SELECTOR
Used to customize control of multiple blinds on a single remote. The currently
selected channel is indicated by the Channel LEDs. Pressing the CHANNEL
Button once will display the current channel. Pressing it again will switch to
the next channel. When all LEDs are lit, the remote is selected to broadcast
on all channels.
SETTING UP THE REMOTE
Determine which blind(s) you wish to pair to the handheld remote.
Press the PROGRAMMING BUTTON on each
SMART WAND™ you wish to pair to the remote
until you hear a SINGLE BEEP (1) [Fig. 1], then
release.
Figure 1;
Push and Hold
1
4
3
2
5
CH
1
4
3
2
5
CH
1
4
3
2
5
1
4
3
2
5
Figure 2; Push Channel
Button
Press the CHANNEL button until the LEDs reflect
the desired channel you wish to set [Fig. 2].
Figure 3; Press in Tack
Use a tack or pen to press and release the PAIRING
button on the back of the remote [Fig. 3] When
this button has been pressed, the LED’s on the
front of the remote will scroll to confirm.
To PAIR, press the top left button on the tilt toggle [Fig. 4]. The blind(s) will
jog down and up showing that it has received the command and completed
the process. If you ever need to unpair, you can repeat the same steps and
press the bottom button on the tilt toggle to unpair [Fig. 5].
1
4
3
2
5
CH
1
4
3
2
5
CH
1
4
3
2
5
1
4
3
2
5
Figure 4; Push To Pair
1
4
3
2
5
CH
1
4
3
2
5
CH
1
4
3
2
5
1
4
3
2
5
Figure 5; Push to Unpair
PAIRING THE REMOTE
Pairing to the remote can be performed before or after installation and
programming of the SMART WAND™.
SETTING THE FAVORITE BUTTON
The FAVORITE Button allows the user to program a slat position unique to
the user which moves all slats included on that channel to the user’s favorite
position.
To program the FAVORITE Button, twist the SMART
WAND™ until the desired position is reached.
Figure 6; Push
and Hold
Programming
Button
Next, press and hold the PROGRAMMING BUTTON on
the SMART WAND™ until you hear a TRIPLE BEEP (3),
then release. [Fig. 6].
Your FAVORITE Button is now programmed to move that
blind to your favorite position. Each SMART WAND™ can
be set to have different favorite positions.
After the SMART WAND™ is set, test by moving your
blinds, then pressing the FAVORITE Button. All blinds on
that channel should move to their programmed favorite
position.
For additional help during Remote Control programming and set up, visit www.currentproductscorp.com/support, where you can read our other support
materials or view our instructional videos. Or, you can reach our customer service department at 850-435-4994.
1995 Hollywood Ave.
Pensacola, FL 32505
850-435-4994
Changing the Batteries
The SMART WAND Remote is powered using (1) 3V 2032 coin cell lithium
battery.
To replace the battery, use a small flat head screwdriver to gently pry the
back off of the remote body.
Once removed, the coin cell battery should be visable. Slide the coin cell
battery down until it comes out of the battery holster. Inset the new battery
by sliding it up into the battery holster.
Replace the remote backing.
