APPLY PRESSURE
TO CORRECT
OVERBEND
TWEAKER™
SHAFTS
5
Figure 2
THE TWEAKER
™
The TWEAKER™ feature allows the operator to correct overbends of
3º or less on
½
"–
¾
"– 1" RIGID/IMC conduit or schedule 40 pipe.
To use the TWEAKER™:
1. Insert the conduit between the TWEAKER
™
shafts shown on Figure 2.
2. Apply pressure to conduit as needed to correct overbend.
MAINTENANCE
Monthly:
Apply multi-purpose grease at grease fitting.
See Item #27 on Exploded View on Page 8.
Monthly:
Apply a few drops of oil into oil hole on bending shoe.
See Item #1 on Exploded View on Page 8.
