SPECIFICATIONS – 77 SERIES ELECTRIC BENDER
The Current Tools Model #292 Hydraulic Power Pump is designed to be
used with single acting hydraulic cylinders rated for 10,000 P.S.I.
length 15 1/2"
width 11 1/2"
height 18"
weight 89 lbs. — empty
106 lbs. — with oil
Power Requirements: 120V AC, 60HZ, single phase, 20 amps
Motor Data: 1 1/2 HP
1725 RPM
Pump Output: Fast advance – 480 cubic inches per minute
at 150 P.S.I.
Full pressure – 56 cubic inches per minute
at 10,000 P.S.I.
Hydraulic Oil: Full capacity 9.5 quarts
Usable capacity 8 quarts
NOTE: ONLY fill with AW32 or equivalent hydraulic oil.
DO NOT use brake fluid.
ATTENTION:
This pump is shipped from the factory with an
unvented fill plug to prevent leakage. Prior to use,
remove the unvented plug and install the vent
plug provided. Failure to install the vent plug will
result in poor performance.
5
SPECIFICATIONS
