background image

10

CURRENT TECHNOLOGY

®

 CURRENTGUARD

TM

 COMPACT INSTALLATION, OPERATION AND MAINTENANCE MANUAL

tnbpowersolutions.com/current_technology

INDICATION  

PROCEDURE

INFORMATION  

EXAMPLE

Troubleshooting 

Installation Assistance

Returns and Warranty  

Procedures 

Your CurrentGuard system does not require scheduled maintenance . The 
unit’s heavy-duty construction is designed to provide years of uninterrupted 
service . The unit contains no serviceable parts .

One or more phase protection status 
indicating lights are off, and Form “C” 
alarm contacts have changed state

Verify that the input power feeding 
CurrentGuard is energized using a voltage 
tester . If power is present, contact factory for 
assistance: 800-238-5000 

Our staff is available to support you .

Monday through Friday, 8:00 a.m to 5:00 p.m. (EST):
800.238.5000 or 804.236.3300.
[email protected]

Model Number  

CGC050-120/208-3GY

Serial Number  

15478-0113-001

Date of Purchase  

January 2, 2013

Sales Order Number  

15478

Description of Failure  

Phase A light is off

Desired Action from Current Technology  

Replace

CurrentGuard Compact units are warranted for a period of 10 years from date 
of purchase . In the event that any module or subassembly within the SPD fails 
to perform as specified during the warranty period, call our Technical Support 
at 800 .238 .5000 to obtain a Return Material Authorization (RMA) number . 
We will immediately ship a replacement for the defective parts free of charge 
(installation labor and site preparation excluded) . Return the defective parts 
to Current Technology within 30 days of receiving the replacement . Failure to 
return the defective parts will result in billing for the replacement parts . To help 
expedite the return procedures, please have the following information at hand 
when you contact Current Technology: 

•  UL Listed 1449 4th Edition, cUL, and UL 1283

• Meets Requirements for UL 96A

•  Compliant to IEEE C62 .41 .1-2002, C62 .41 .2-2002 and C62 .45-2002

• NFPA 70 [NEC], Article 285

• RoHS Compliant

Standards and Listings

The following standards and listings apply to the CGC product line:

Summary of Contents for CGC Series













Reviews: