Curb Roller Manufacturing BATT Screed 6000, Owner'S Manual

Page: 3 / 16

WARNING
WARNING
WARNING
WARNING
improvements will be made from
time to time. Please note some
changes or modifications may not
be covered in this manual. If the
operating characteristic or the
appearance of your machine differs
from those described in this manual,
please contact Curb Roller Mfg. for
questions or assistance.
Safety
Always transport the BATT 6000
with the batteries removed from
the drill to avoid any accidental
rotation or power loss.
Do not install battery until the
drive unit is hooked up to the
pipe insert and hands and
fingers are away from the chuck
and any moving parts.
Make sure the second operator
has a good hold on the opposing
t-bar handle attached to the
pipe.
Make sure everyone around the
pipe is aware the pipe is about
to spin.
BATT Screed 6000 Package
This package includes:
(1) Drive Unit
(1) T-bar Assembly
(2) Expandable Pipe Ends
(2) DeWalt 12-Amp Hour Batteries
(1) DeWalt FLEXVOLT Charger
*Pipe is sold separately. If buying
from outside source, Curb Roller
Mfg. recommends using aluminum
pipe:
6061-T6 EXTRUDED PORTHOLE
PIPE - ASTM B429 - 4” SCH 40
(4.500 OD X .237 W)