Cupra BORN, Owner'S Manual

Page: 185 / 343

Assistant systems
184
Keep the external mirrors clean and free of
snow and ice, and do not cover them with ad-
hesives or other similar materials.
Lane assist Plus.
The Lane Assist Plus function can be used by
activating the
Lane Assist
›››
page 173 and
Side Assist functions. In this case its functions
are expanded as described below.
If the driver initiates a lane change manoeuvre
in a potential critical situation:
•
The lamp flashes in the corresponding rear-
view mirror even though the turn signal has not
been activated.
•
The steering wheel vibrates to warn the
driver of the risk of collision.
• torque is applied to correct the steering and
return the vehicle to its lane.
Driving situations
Fig. 142 Schematic diagram: Passing
situation with traffic behind the vehicle.
Indication of the lane departure warning in
the control lamp on the left side.
Fig. 143 Schematic diagram: Situation
of an overtaking in the centre lane and
then moving into the right-hand lane.
Indication of the lane departure warning in
the control lamp on the right side.
In the following situations, an indication will be
displayed in the control lamp
›››
Fig. 142
(arrow) or
›››
Fig. 143 (arrow):
• When being overtaken by another vehicle
›››
Fig. 142 .
• When passing another vehicle
›››
Fig. 143
with a speed differential of approx. 10 km/h (6
mph). If the vehicle is passing at a considerably
higher speed, no indication will be displayed.