Troubleshooting |
Money Machine
®
2
bin models | 13
Remove jam or debris
Proceed to clear table jam or remove debris from sort pad. Large debris or coins may be
removed from the sort pad by hand.
Never wipe sort disk or pad, except as instructed on page 26.
Latch the sort disk
Before operating Money Machine 2, latch the sort disk as shown.
DO NOT attempt to force the sort disk onto the sort pad for latching. If the disk
resists being lowered into position, raise it again. Carefully remove coin and
debris from all surfaces and surrounding area before repeating the latching
process.
1.
Without forcing, press the sort disk down until it is flush with the sort pad. If disk
resists, repeat cleaning – see stop message above.
2. Turn latch to lock the disk in place. Latch should be at a full right angle to the un-
latched position, as shown.
Correct:
disk is secured
Incorrect:
disk is not secured
Sort disk should always be latched properly before restoring Money
Machine 2 to service. An improperly latched sort disk negatively
impacts performance and may damage the machine.
