6. Inspect sort pad for any cuts that may affect the sorter's accuracy. Replacement sort pads are available
from your Local Cummins Allison branch office.
7. Replace the sort head and secure the latch.
8. Reinstall coin tray and secure in place.
9. Clean remaining exterior surfaces as needed with a Simple Green Safety Towel. If using Simple Green
concentrate, dilute 1 part Simple Green with 8 parts water. Apply with microfiber towel.
Lift Tray Assembly Removal and Installation
Figure1 – Lift Tray Assembly and Installation
Lift tray assembly removal – FIGURE 1
1. Pull back and up on the bottom of the latch (Figure 1) until it pops loose.
2. Pull the base up and backward to clear the two tabs at the front of the tray where they slip under the
Display Assembly.
Lift tray assembly installation – FIGURE 1
1. To install the lift tray assembly, slip the two tabs at the front of the tray under the display assembly and
lower the base into the cabinet.
2. Hook the top of the latch over the tab on the tray base (Figure 1) and press down and in on the bottom of
the latch until it snaps in place.
800 786 5528
Page 3 of 5
cumminsallison.com
