10 |
Single-pocket JetScan
®
currency scanner
| Getting started
Strap counts and strap limits
To view current strap limits and counts, press
STRAP
on the main screen. The STRAP
SETTINGS screen is displayed, similar to the following example:
A strap limit may be set for any denomination by piece count or value in all operating
modes, except for
COUNT
,
MIX
,
MIX/FACE
and
MIX/ORIENTATION
.
Denominations are itemized in the DENOM column. The UNIT column indicates the
current strap count. The LIMIT column indicates the current strap limit. The COUNT
row refers to the non-value piece count and appears in
COUNT
mode only.
How to set strap limits
To set a strap limit:
1. Define the strap limit type by selecting
UNIT
(piece count) or
VALUE
(amount).
UNIT/VALUE
buttons toggle.
2. Press or to scroll through the denominations. Stop on the desired
denomination.
3. Enter a strap limit by doing one of the following options:
• Select a preset strap limit or
infinite
(
INFIN
). There are seven preset strap
limits:
5
,
10
,
20
,
25
,
50
,
75
, and
100
pieces
(or their value equivalents).
• Press
+
or
–
to increase or decrease the strap limit setting as needed.
4. Press or to select to the next desired note and repeat Step 2 to set the strap
limit.
5. When configuration is complete, press
EXIT
to return to the main screen.
How to clear strap counts
To clear a note’s strap count to
0
, select the note using or and then press
CLEAR
. To clear all note strap counts to
0
, press
CLEAR
followed by
ALL
. If STRAPS
CLEAR is set to
ENDBT
in
SETUP
, then ending a batch automatically clears all strap
counts.
Button toggles
between
VALUE
and
UNIT
