background image

4801-5327 Rev 1-15 

Mega-Flow External Damper Fan - Unassembled  

Page 3 of 24

 

 

Limited Warranty

 

1.  Limited Warranty 

The GSI Group, LLC. (“GSI”) warrants products which it manufactures to be free of defects in materials and 
workmanship under normal usage and conditions for a period of 12 months after sale to the original end-user or if a 
foreign sale, 14 months from arrival at port of discharge, whichever is earlier.  The end-

user’s sole remedy (and GSI’s 

only obligation) 

is to repair or replace, at GSI’s option and expense, products that in GSI’s judgment, contain a 

material defect in materials or workmanship.  Expenses incurred by or on behalf of the end-user without prior written 
authorization from the GSI Warranty Group shall be the sole responsibility of the end-user. 

 

Warranty Extensions

:

  The Limited Warranty period is extended for the following products: 

 

Product 

Warranty Period 

AP Fans and 
Flooring 

Performer Series Direct Drive  
Fan Motor 

  3 Years 

All Fiberglass Housings 

 Lifetime 

All Fiberglass Propellers 

 Lifetime 

AP/Cumberland 

Flex-Flo/Pan Feeding Systems 

 2 Years 

Cumberland 
Feeding/Watering 
Systems 

Feeder System Pan Assemblies 

  5 Years ** 

Feed Tubes (1.75" & 2.00") 

10 Years * 

Centerless Augers 

10 Years * 

Watering Nipples 

10 Years * 

Grain Systems 

Grain Bin Structural Design 

  5 Years 

Grain Systems 
Farm Fans 
Zimmerman

 

Portable & Tower Dryers 

  2 Years 

Portable & Tower Dryer Frames 
and Internal Infrastructure † 

  5 Years 

 

GSI further warrants that the frame, basket and excluding all auger and auger drive components of the portable and 
tower dyer shall be free from defects in materials for a period of time beginning on the twelfth (12

th

) month from the date 

of purchase and continuing until the sixtieth (60

th

) month from the date of purchase (extended warranty period). During 

the extended warranty period, GSI will replace the frame or basket components that prove to be defective under normal 
conditions of use without charge, excluding the labor, transportation, and/or shipping costs incurred in the performance 
of this extended warranty. 

Conditions and Limitations: 

THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE LIMITED WARRANTY DESCRIPTION SET FORTH 
ABOVE.  SPECIFICALLY, GSI MAKES NO FURTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE OR USE IN CONNECTION WITH:  (i) PRODUCT MANUFACTURED OR SOLD BY GSI OR (ii) ANY 
ADVICE, INSTRUCTION, RECOMMENDATION OR SUGGESTION PROVIDED BY AN AGENT, REPRESENTATIVE 
OR EMPLOYEE OF GSI REGARDING OR RELATED TO THE CONFIGURATION, INSTALLATION, LAYOUT, 
SUITABILITY FOR A PARTICULAR PURPOSE, OR DESIGN OF SUCH PRODUCTS. 

GSI shall not be liable for any direct, indirect, incidental or consequential damages, including, without limitation, loss of 
anticipated profits or benefits.  The sole and exclusive remedy is set forth in the Limited Warranty, which shall not exceed 
the amount paid for the product purchased.  This warranty is not transferable and applies only to the original end-user.  
GSI shall have no obligation or responsibility for any representations or warranties made by or on behalf of any dealer, 
agent or distributor. 

GSI assumes no responsibility for claims resulting from construction defects or unauthorized modifications to products 
which it manufactured.  Modifications to products not specifically delineated in the manual accompanying the equipment 
at initial sale will void the Limited Warranty. 

This Limited Warranty shall not extend to products or parts which have been damaged by negligent use, misuse, 
alteration, accident or which have been improperly/inadequately maintained.  This Limited Warranty extends solely to 
products manufactured by GSI.   

Prior to installation, the end-user has the responsibility to comply with federal, state and local codes which apply to the location and 
installation of products manufactured or sold by GSI.

 

* Warranty prorated from list price: 
        0 to 3 years 

– no cost to end-user 

        3 to 5 years 

– end-user pays 25% 

        5 to 7 years 

– end-user pays 50% 

        7 to 10 years 

– end user pays 75% 

 
** Warranty prorated from list price: 
        0 to 3 years 

– no cost to end-user 

        3 to 5 years 

– end-user pays 50% 

 
  

† Motors, burner components and    

     moving parts not included. Portable  
     Dryer screens included. Tower Dryer  
     screens not included. 

Summary of Contents for Mega-Flow External Damper Series

























Reviews: