Cumberland EDGE 891-00516 Wiring Diagram Download Page 41 | Manualshive

Page: 41 / 63

Cumberland EDGE 891-00516 Wiring Diagram Download Page 41

Chapter 2: Basic connections

WARNING

Installation must only be performed by qualified service personnel.

WARNING

Wear appropriate grounding devices such as an anti-static wristband to service the
system.

WARNING

Lock the enclosure once the wiring is completed or when servicing. Use the
included nut and bolt or a padlock (not included) to lock the enclosure.

CAUTION

Before servicing the system, disconnect the main voltage supply.

1. Unlock the Expansion Box and open the plastic cover.

2. Disconnect the main voltage supply and ensure the box is completely powered down.

3. Locate the plug-in module slot where you need to add the plug-in module.

4. Position the plug-in card so that it is aligned with the black connector on the backplane, and so the

red plastic handle aligns in the slots.

5. When the plug-in module is correctly aligned, press the card into the slot, ensuring the red plastic

carrier is locked in place at both the top and bottom.

«
...
39
40
41
42
43
...
»

Summary of Contents for EDGE 891-00516
































































Reviews:

No comments