STEP 2
Attach your cleats 3/4″ from the top edge of the 2x6s with the 2 1/2″ screws and glue. By doubling up the 2×6
)/# сۖуѶ2 #1 created a super strong support system for the slats. Also use 2 1/2″ screws from the
*0/.$ *!/# !-( .0++*-/ ).$)/*/# ) " .*!/# ' /.ѵ
STEP 1
Use 2 1/2″ screws and glue to build your support frame. I would use 3 screws per corner. Check for square.
STEP 1
STEP 2
Use 2 ½” screws and glue to build your support frame. Recommend 3 screws per corner. Check for square.
Attach your cleats ¾” from the top edge of the 2x6s with the 2 ½” screws and glue.
Doubling up the 2×6 and the 2×4, creates a super strong support system for the slats.
Use 2 ½” screws from the outside of the frame support ends into the end edges of the cleats.
