About This Manual
4
01037540 C 02/21
This manual:
• Familiarizes the operator with the equipment
• Explains installation and setup procedures
• Provides basic programming information
• Explains the various modes of operation
• Gives specifications and troubleshooting information
Read this Manual First
Before you operate the Culligan® unit, read this manual to become familiar with the device and its capabilities�
Installation or maintenance done on this system by an untrained service person can cause major damage to equipment
or property damage� Not adhering to the recommended service/maintenance can cause damage to equipment or
property damage�
Safety Instructions and Safety Definitions
Note
NOTE!
“Note!” is used to emphasize installation, operation or maintenance
information which is important, but does not present any hazard.
Caution
CAUTION!
“Caution” is used when failure to follow directions could result in damage to equipment or property.
Warning
WARNING!
“Warning” is used to indicate a hazard which could cause injury or death if ignored.
The
CAUTION
and
WARNING
paragraphs are not meant to cover all possible conditions and situations that may occur�
It must be understood that common sense, caution, and careful attention are conditions which cannot be built into the
equipment� These
MUST
be supplied by the personnel installing, operating, or maintaining the system�
NOTE!
Be sure to check and follow the applicable plumbing codes and ordinances when installing this equipment.
WARNING!
Use protective clothing and proper face or eye protection equipment when handling chemicals
or power tools.
