Culligan 01036140 Owner'S Manual Download Page 4

4

01037540

This manual:

•  Familiarizes the user with the equipment
•  Explains how the Salt Free Conditioner operates
•  Gives specifications and troubleshooting information

Read this Manual First

Before you operate the Culligan Salt Free Conditioner, read this manual to become familiar  

with the device and its capabilities.
Installation or maintenance done on this system by an untrained service person can cause major 

damage to equipment or property damage. Not adhering to the recommended service/maintenance  

can cause damage to equipment or property damage.

Safe Practices

Throughout this manual there are paragraphs set off by special headings.
Notice (or Note) is used to emphasize installation, operation or maintenance information which  

is important, but does not present any hazard. For example,

NOTICE 

The clamp and valve will be able to rotate on the tank until pressure is applied.

Caution is used when failure to follow directions could result in damage to equipment or property.

CAUTION!  Disassembly while under water pressure can result in flooding.

Warning is used to indicate a hazard which could cause injury or death if ignored.
The CAUTION and WARNING paragraphs are not meant to cover all possible conditions and situations 

that may occur. Understand that common sense, caution, and careful attention are conditions which 

cannot be built into the equipment. These MUST be supplied by the personnel installing, operating,  

or maintaining the system.
Be sure to check and follow the applicable plumbing codes and ordinances when installing this 

equipment. Local codes may prohibit the discharge of sanitizing or descaling solutions to drain.
Use protective clothing and proper face or eye protection equipment when handling chemicals or tools.

NOTE: 

The Culligan Salt Free Conditioner is not intended for use with water that is 

microbiologically unsafe or of unknown quality without adequate disinfection 

either before or after the system.

NOTE: 

Check with your public works department for applicable local plumbing and 

sanitation codes. Follow local codes if they differ from the standards used in 

this manual. To ensure proper and efficient operation of the Culligan Salt Free 

Conditioner to your full satisfaction, carefully follow the instructions in this manual.

About this 

Manual

Summary of Contents for 01036140













Reviews: