BEFORE INSTALLING, PLEASE MAKE SURE:
•
If the unit has recently been transported do not use for a minimum of 24 hours before installing.
•
Make sure that the unit is at the desired temperature before loading it with product.
•
Ensure that the unit will have proper ventilation in the area that it will operate.
•
Inspect the unit to verify all accessories (shelves, shelf clips) are equipped with the unit before proceeding with installation.
•
Review the entire manual in its entirety. Lack of maintenance or misuse of the unit will void the warranty.
•
To minimize shock and
fi
re hazards, be sure not to over load the outlet. One outlet should be designated to the unit only.
•
Do not use extension cords.
•
Do not put hands under the unit when moving.
•
When the unit is not being used for an extended period of time, unplug the unit from the outlet.
•
After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure to wait the allotted time may cause damage to
the compressor.
•
To minimize shock and/or
fi
re hazards, be sure not to plug or unplug the unit with wet hands.
•
Before any maintenance or cleaning, unplug the unit as a precaution.
•
To minimize shock and
fi
re hazards, make sure that the unit is properly grounded.
•
Do not attempt to remove or repair any component.
•
Make sure that the unit is not resting on or against the electrical cord or plug.
•
Do not hang or lean against door as this may cause personal injury or damage to the door hinge.
•
Do not store any
fl
ammable and/or explosive gas or liquids inside the unit.
•
Do not attempt to alter or tamper with the electrical cord.
•
Do not set the desired temperature out of the recommended temperature range:
(FREEZER:-8°F – 20°F)
CABINET LOCATION GUIDELINES
Install the unit on a
fl
at sturdy surface
•
Unit may make abnormal noises if surface is uneven
•
Unit may malfunction if surface is uneven
Install the unit in an indoor, well-ventilated area with a
fl
oor drain nearby
•
Unit performs more ef
fi
ciently in a well-ventilated area
•
For optimal performance, maintain a clearance of at least 6” around all sides
•
Outdoor use may cause decreased performance and may damage the unit
Avoid installing the unit in a high humidity and/or dusty area
•
Exposure to humidity may cause the unit to rust and/or decrease the ef
fi
ciency of the unit.
•
Dust build up on the condenser coil will cause the unit to malfunction. Clean the condenser at least once a month
with a brush or clean cloth. Neglect of maintenance will void the warranty.
Select a location away from heat and moisture generating equipment
•
High ambient temperatures will cause the compressor to overcompensate, leading to higher energy bills and
eventual break down of the unit. With the lid open, the unit should not be used in areas of 80 degrees. The unit should
not be used in areas over 90 degrees.
•
Malfunction due to high temperatures will void the warranty.
ELECTRICAL
Please ensure that the required voltage of the compressor is constant at all times. Low or high voltage can detrimentally affect
the unit and there by void its warranty.
All units should be plugged into a grounded and properly-sized electrical outlet with an appropriate over current protection.
Please refer to the electrical requirements on the serial tag located inside the unit. Please make sure that the unit has its own
dedicated outlet. Do not use an extension cord.
WARNINGS
INSTALLATION
Dipping Cabinets
A Professional Line of Commercial
Refrigerated
Equipment
