Culina UBKCIND60BV, Instruction Manual / Installation Manual

Page: 15 / 24

15
Hints and Tips
Problem Possible causes What to do
The cooktop cannot
Be turned on. No power.
Make sure the cooktop is connected to
the power supply and that it is
switched on.
Check whether there is a power
outage in your home or area. If you’ve
checked everything and the problem
persists, call a qualified technician.
The touch controls are
unresponsive.
The controls are locked.
Unlock the controls. See section
‘Using your ceramic cooktop’ for
instructions.
The touch controls are
difficult to operate. There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls. Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used. Use cookware with flat and smooth
bases. See ‘Choosing the right
cookware’.
See ‘Care and cleaning’.
Some pans make crackling
or clicking noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently). This is normal for cookware and
does not indicate a fault.
The induction hob makes a
low humming noise when
used on a high heat setting. This is caused by the technology
of induction cooking. This is normal, but the noise should
quieten down or disappear completely
when you decrease the heat setting.
Fan noise coming from the
induction hob. A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue to
run even after you’ve turned the
induction hob off. This is normal and needs no action.
Do not switch the power to the
induction hob off at the wall while the
fan is running.
Pans do not become hot
and appears in the display. The induction hob cannot
detect the pan because it is not
suitable for induction cooking.
The induction hob cannot detect the pan
because it is too small for the cooking
zone or not properly centered on it. Use cookware suitable for induction
cooking. See section ‘Choosing the
right cookware’.
Centre the pan and make sure that its
base matches the size of the cooking
zone.
The induction hob or a
cooking zone has turned
itself off unexpectedly, a
tone sounds and an error
code is displayed (typically
alternating with one or two
digits in the cooking timer
display). Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.