24
Removing the inner door glass for cleaning
o
Do not use any abrasive cleaner that could cause damage.
o
Remember that if the surface of the glass panel becomes
scratched, this could lead to a dangerous failure.
o
To facilitate cleaning, the inner door glass can be lifted out.
o
Unscrew the bracket latch that is in the corner of the top of the
door. Remove the glass from the door and clean with warm
soapy water.
o
After cleaning, insert the glass panel correctly back into the door.
Screw the bracket latch back into place.
o
IMPORTANT: Remember where the panel of glass is
removed from so you can reassemble the door correctly.
Do not mix the glasses up or rearrange the order.
A
a. Press and hold the two sides of the grid with
both hands to pull it out
.
Pull out the grid
Right
Left
b. Remove the inner glass can be removed raster
.
B
c. The inner glass pulled out from beneath plastic
fixed block. After cleaning, the inner glass insert
the following plastic fixed block, then install the
above plastic mounting block and tighten the
screws.
C
Summary of Contents for UBEMF73
Page 34: ...32 IM UBEMF73 20180510...
