Culina UB70NMFS User Manual Download Page 5

SAFETY HINTS 

Do not use the oven unless you are wearing something on  your feet. Do not touch the oven
with wet or damp hands or feet.

For oven: Oven door should not be opened often during the cooking period.

The appliance must be installed by an authorized technician and put into use. The producer is
not responsible for any damage that might be caused by defective placement, and installation
by unauthorized personnel.

When the door or drawer of oven is open do not leave anything on it, you may unbalance your
appliance or break the door.

Some parts of appliance may  keep its heat for a  long time; it is required to wait for it to cool
down before touching onto the points that are exposed to the heat directly.

If you will not use the appliance for a long time, it is advised to plug i  off.

FITTING THE OVEN INTO THE KITCHEN UNIT  

Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into 
an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the 
frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation, 
the measurements and distances adhered to when fixing the oven. 

 

IMPORTANT 

If the oven is to  work properly, the kitchen housing must be suitable. The panels of the kitchen unit  
that are next to the oven must be made of a heat  resistant material. Ensure that th e glues of units  
that are made of veneered wood can with stand temperatures of at least 120  ºC. Plastics or glues 
that  cannot  withstand  such temperatures w ill  melt and deform t he  unit, once the oven has been 
lodged  inside t he  units, elec trical  parts must  be  completely  insulated.  This is a legal safet

requirement. All guards must be firmly fixed into place so that it is impossible to remove them without 
using  special to ols.  Remove the back of the  kitchen  unit to en sure  an adequ ate  current o f  air 
circulates around the oven. The hob must have a rear gap of at least 45 mm. 

DECLARATION OF COMPLIANCE

   

When you have unpacked the oven, make sure that it has not been 
damaged in any way. If you have any doubts at all, do not use it: contact a 
professionally qualified person. Keep packing materials such as plastic 
bags, polystyrene, or nails out of the reach of children because these are 
dangerous to children.   

t

5

Summary of Contents for UB70NMFS





















Reviews: