4 |
w w w . c u j o c o n t r o l . c o m
Charging the Remote and Receiver
Both the
Remote Control
and
Receiver
(the receiver is the black plastic device connected to the
collar) use lithium batteries that can be recharged. For best results, please charge the remote and
the receiver for
3 hours
each before using the first time.
There are 3 bars to show the battery power level. 3 bars means the
remote is fully charged.
To charge the
Remote
, simply slide the black rubber
cover on the top of the remote to the side, and insert
the charger into the charging hole. Since this is a USB
charger, you can charge the remote from a computer,
or you can charge it from a wall outlet.
To charge the
Receiver
, simply open the protective rubber cover and insert
the charger into the charging hole. Note: The same charger is used to
charge both the remote and the receiver.
When charging, a
red LED light
will blink on the receiver to indicate that it is
being charged correctly. When the receiver is fully charged, the light will stop blinking.
