Cuizimate RBSK1.5LDW-BE, Instruction Manual, Page: 10 / 14

SAFETY FEATURE
If the appliance is switched ON with
too little water, or no water, it is
protected against dry-heating damage
by a safety cut-out which will switch
off the power. If the cut-out operates,
disconnect the appliance from the
main power supply and leave to cool
down before refilling it with cold
water.
If the supply cord is damaged, it must
be replaced by the manufacturer or
its agent or similarly qualified
person in order to avoid hazard.
Do not touch hot surface i.e. body
or lid; Use handles or knobs.
Do not move the appliance while
it is in use
Do not use the appliance outdoors
10.
11.
12.
13.
Operating Instruction
Remove all packaging
Ensure the supply voltage is the
same as indicated on the product.
Fill in the appliance with water
to the MAX capacity and allow
it to boil. Discard the water
afterwards and rinse with cold
water
Remove the appliance from the
power base and fill with water
between the MIN & MAX
markings.
DO NOT OVERFILL OR
UNDER-FILL THE APPLIANCE.
If the appliance is overfilled,
boiling water may be rejected.
If under-refilled, the appliance
may run dry while operating
Place the appliance on the base
and ensure the lid is firmly
closed.
When the switch is in the “OFF”
position, the appliance is not
operating and the indicator light
is off.
When the switch is in the position
of “200W”, the indicator light
is on; the appliance start to heat
with lower power, it will slowly
heat up until reaches 100 �C and
keep continuously heating.
When the switch is in the position
of “600W”, the indicator light is
on; the appliance will heat with
higher power, it is fastly heat up
until it reaches 100 �C and keep
continuously heating.
For your safety, please turn the
switch to the “OFF” position
Before use for the first time
FILLING
OPERATION INSTRUCTIONS:
•
•
•
•
•
•
1.
2.
3.
4.
-8-