Cuizimate RBSHANDBLEND800, Instruction Manual

Page: 20 / 31

DANGER! Risk of electric shock due to moisture
DANGER! Risk of electric shock
This device must never be operated close to a bathtub, shower, filled hand basin or similar.
The motor block, the power cable and the mains plug must not be immersed in water or
any other liquids.
Protect the motor block against moisture, drips and splashes.
If liquid gets into the motor block, remove the mains plug immediately. Have the device
checked before reusing.
Never touch the device with wet hands.
If the device falls into water, disconnect the mains plug immediately. Only then is it safe
to retrieve the device.
Only insert the mains plug into the wall socket after the device has been completely
assembled and filled.
Only connect the mains plug to a properly installed and easily accessible wall socket
whose voltage corresponds to the specifications on the rating plate. The wall socket must
continue to be easily accessible after the device is plugged in.
Ensure that the power cable cannot be damaged by sharp edges or hot points. Do not
wrap the power cable around the device.
The device is not fully disconnected from the power supply, even after it is switched off. In
order to fully disconnect it, pull out the mains plug.
When using the device, ensure that the power cable cannot be trapped or crushed.
When removing the mains plug, always pull the plug and never the cable.
Disconnect the mains plug from the wall socket ...
... if there is a fault,
... when the blender is not in operation,
... prior to each cleaning, and
... during thunderstorms.
Do not use the device if there is visible damage to the device or the power cable.
In order to avoid hazards, and to comply with safety requirements, repairs to this electrical
appliance or its power cord must be carried out by our customer service. If repairs are
needed, please send the appliance to our customer service department
-19-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•