Cuizimate IN-388, Instruction Manual, Page: 20 / 22

PHENOMENON
CHECK POINTS REMEDY
Error codes occur E0
Error codes occur E2
Error codes occur E4
Error codes occur E6
Error codes occur E1
Error codes occur E3
Error codes occur E5
Error codes occur E7
Without Cookware or
Incompatible cookware used
Low-Voltage
High-Voltage
Top plate Overheat
Top Plate Sensor Open
Circuit
IGBT Overheat
Top Plate Sensor Short
Circuit
Internal circuit error
When showing error signal E0,
E3, E5, please check whether
the cookware is not suitable,or
switch on the appliance again
after it is cooled down naturally.
When showing E1, E2, E4, E6,
E7, please contact service center
for checking and repairing
The above are the recommended inspection of common failures.
Please do not disassemble the cooker by yourself to avoid any danger or damage to
the induction cooker.
Cleaning and care
Before cleaning, please unplug
the cooker and make sure the ceramic
board is not hot.
The induction cooker body shall
be cleaned lightly with flexible
dry cloth.
Note: Never clean the cooker with
water.
1.
2.
For the oily dirt on the ceramic
plate, clean with soft wet cloth
dipped in little toothpaste or neutral
detergent and clean with soft wet
cloth until no residue exists.
If you won’t use the cooker for a
long time, please unplug the cooker
and keep the cooker away from
the dirt.
3.
4.
-19-