5
8. Water temperature will continue to rise
until boiling occurs. The switch will then
automatically go into the OFF position.
9. If the water has cooled and you need
boiling water again, simply switch the
kettle on.
HELPFUL HINTS
• Always use fresh water in the kettle.
• If the kettle is accidentally switched on
without a sufficient amount of water, a
boil-dry safety mechanism will
automatically switch the kettle off.
• The lid should always be securely in place
while heating water.
CLEANING AND
MAINTENANCE
• The kettle should always be emptied
before cleaning and storage.
• It is extremely important to remember
that cleaning of the kettle can only be
performed when the plug has been
removed from the power supply.
• Cleaning should be performed only when
the kettle has cooled down.
• Always ensure the electrical connections
of the kettle remain absolutely dry.
• Ensure the outside and the electrical
connections of the kettle are completely
dry before using.
• Wipe the kettle and base with a soft,
damp cloth. Do not use cleaning
products that can cause health hazard or
discoloration of the kettle.
• Do not use abrasive cleansers or scouring
agents of any kind on the interior or
exterior of the kettle.
•
Never immerse any part of the kettle,
especially the cable and base, into
water.
To install filter and remove it for cleaning,
follow instructions below:
For cleaning the filter, please refer to the
illustrations above at right, for assembling
and disassembling:
Filter Assembly Sequence
Filter Disassembly Sequence
Remove filter,
as shown in number 2.
Push down on filter as
shown in number 1.
Lift up the filter to click
into place.
Hang on filter holder.
While filter is hanging,
lift it up.
